Sea2d34 0.1A~3.0A Stepper Motor Driver

*  High performance, low noise, affordable price, high speed and torque, excellent stability

*  4 selections of uniform angle and constant torque subdivisions, the max resolution up to 12800 steps / rev

*  Adoption of 6-wires-control circuit greatly reduces noise and increases the rotation stability

*  The max response frequency up to 200Kpps

*  Once the pulse stops for more than 100ms, the coil current will be halved automatically, to prevent the overheating

*  Bipolar constant current chopper control improves the output speed and power of the motor

*  Optically isolated signal I / O

*  Current range: 0.1A~3.0A

*  Single power input, voltage range: DC12~40V ( the optimal voltage is DC36V )

*  Error Protection: Overheating Overcurrent Low voltage

*  Size: 136mm×92mm×25mm, Net weight: 0.3kg
 

       SEA2D34 is a microstep motor driver with uniform angle and constant torque subdivisions, voltage range is DC12~40V ( the optimal voltage is DC36V ), single power supply. It matches 2 phase hybrid stepper motors which rated current under 3.0A, external diameter 42mm~60mm, and outlets 6 or 8.

       Bipolar constant current chopper control makes the motor run smoothly with lower noise and higher stability, The increase of the voltage greatly improves the drive capability. and speed, The coil current will be halved automatically onece the pulse stops for more than 100ms, it reduces the heat of driver by 50%, reduces the heat of motor as well. Users can choose low speed high subdivision which up to 12800steps / rev, it improves the precision, reduces the vibration and noise.
 

Carpentry engracing machine, Laser engraving machine, Labelling machine, Die bonder, Inkjrt printer, Embroiderer, Dispenser, BGA repair machine, Laminating machine Wire-stripping machine, Winding machine,Hot-press machine, PCB drilling machine, Non-standard equipment XYZ gauge, Connctors assemble machine, Medical equipments, Semiconductor Equipment, Blast furnace, etc.
 

1,Please do not reverse the power supply, input voltage not more than DC40V;

2,The input control signal level is +5V, if higher than +5V, needs to add a resistor on PU-, DR-, FM- ( do not add on + sides );

3,This model of the driver uses a special control circuit, so it matches stepper motor of 6 or 8 outlets only;

4,The driver will automatically stop working when the temperature exceeds 70 degrees, the O.H indicator light normally on, temperature drops to 50 degrees it automatic recovers to work, please install radiator when it's in overheating protection;

5,When the current exceeds rated value or the voltage is lower than rated value, the O.C indicator light normally on, please check the connections and other short troubles needs to re-up power after the faults cleared, or if the power voltage is too low;

6,The PWR green indicator light normally on when the driver is powered on;

7,The TM indicator light comes on when the pulse input go crossing the zero point.

Every year,we have many exhibitions both at home and abroad to display our products to our native and international clients.

Now,we alredy have exhibition locations in Shenzhen ,Shanghai,Taiwan, India,UKrine, Germany,Turkey,and so on .For many years

we company has always been dedicated to develop and research our products and maintain the best service towards our clients.

 Any questions are welcomed here and solved immediatel.

As long as you give an order,we will inform the factory immediately and ship the goods as soon as possible.Any problems will be answered immediately.